- Truck Tents
- SUV Tents
- Napier Rooftop Tent
- Replacement Parts
- Napier Nation
- Our Company
- Find A Retailer
Sportz Avalanche Truck Tent
The Sportz Avalanche Truck Tent assembles in the back of your open-bed Chevrolet Avalanche or Cadillac Escalade EXT, creating a comfortable, restful sleeping for those long road trips or extended adventures. Forget worrying about finding the perfect flat ground or booking motels, setup camp anywhere under the stars right in your pickup. With a rear access panel to reach your gear from inside the tent, heavy duty waterproof rating, patented full floor design, and extendable awning, you’re ready to take on any adventure regardless of the conditions.
Note: During assembly, ensure the tailgate pole is set-up on the outside of the tailgate wires.
Out of stock
Product Videos & Features
Truck model dependent
5.7' - 5.8'
23 - 26lbs
Blue & Gray
No. of Doors
No. of Windows
No. of Poles (Tent)
6 Shock Corded Fiberglass
No. of Poles (Awning)
2 Shock Corded Fiberglass, 2 Steel
Yes - Windows & Doors
1200mm PU Coating
Wall and Roof Material
Polyester Tafetta w/ Taped Seams
Rear Access Panel
Seasons for Use
Spring, Summer, Fall
Gear Loft, Gear Pocket, Lantern Holder
Begin by measuring the bed of your truck with the tailgate closed. Our sizing guides will help you determine which tent is compatible with your truck. Our website also displays a sizing chart for your convenience.
Yes. The tent will work with a sprayed, mat, or prefabricated liner.
No. Truck Tents will not work as long as the camper shell/cap is assembled. Napier SUV Tents are the best option as long as the height from the ground to the highest point of the cap window/door does not exceed 80”.
Yes. One person is able to set up a Napier Truck Tent, however we do recommend having assistance during the first set-up. The first set-up should take approximately 15 minutes and about 10 minutes each time thereafter. Each tent comes with set-up instructions and color-coded poles for easy assembly.
Our truck tents will fit over Roll-Up Tonneau Covers if the rolled-up tonneau cover is less than 6” high
No. Driving with the tent mounted to your vehicle may cause personal injury and/or damage to your tent and truck.
Railings will work as long as they are less than 3” tall. Roll and sports bars must be removed.
Yes. We recommend placing the tent over the toolbox to minimize the amount of water that could enter between the box and the tent. It is also recommended to cover the corners of the toolbox to protect the tent from ripping on sharp edges. Please note that you will lose the amount of space that the toolbox occupies.
As long as the back rack does not intrude onto the rails of the truck too far, it should not impact the functionality of the tent. Please email email@example.com with a photo or the exact model of your back rack to determine if the rack is compatible.
Our tents already have a water-resistant coating on them. However, the coating may wear down over time and you may want to spray a water repellent coating onto the tent and rainfly after a few years of use. For additional protection and product maintenance, you may wish to use a seam sealant on your tent.